Broco BR22 Plus Cutting Torch

Broco BR22 Plus Cutting Torch

This new torch features 21 design improvements, including the removal of all rubber from direct oxygen pathway, a PTFE lined fiberglass reinforced coupler hose, improved flash arrestor with higher oxygen flow rate and better flash back protection, non-return valve to prevent back flow, and improved collet and collet washer design.

Featuring 21 new design improvements, including:

  • Redesigned collet provides tighter hold on the cutting rod. Redesigned collet washer removes rubber from the oxygen stream and extends washer life.   
  • Ceramic washer provides noncombustible electrical isolation.   
  • PTFE lined fiberglass reinforced hose withstands extremely high operating temperatures and is combustion resistant.   
  • The internal gasket reduces electrolysis, insulates the diver�s hand from electrical current, and reduces potential for gas pockets in the torch.   
  • Sintered element slag arrestor withstands more heat and sparks and increases oxygen flow rate.
  • Non-return valve stops the flow of hot gases in the event of a flash back.
  • Valve lever and valve stem have been redesigned to allow manual return should the valve stem get stuck.
  • Redesigned valve to better meter flow.
Please login to display prices
Ask a question about: Broco BR22 Plus Cutting Torch [BR22PLUS]
Your Info * Required information
Your Name: *
Your E-Mail: *
Your Question
DDS Commercial Diving Equipment Schootense Loop 4J | 5708 HX Helmond The Netherlands
Tel. +31 (0)492-752756 Fax +31 (0)492-752122 E-mail: info@dds-diving.com